Pc3 fitting
Pc3 fitting
Bought one a few months ago for my zx6, keep looking at it and saying I'll do it next week.. What's the potential for fucking it up or am I just being a pussy putting it off??
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Re: Pc3 fitting
Man up! Its very easy. Watch a utoob vid to give you the inspiration. Download a map off Dynojet.
Install the hardware.
Upload the map
Zero the throttle.
Test ride.
Book a dyno run for max effect.
Install the hardware.
Upload the map
Zero the throttle.
Test ride.
Book a dyno run for max effect.
Revving the bollox off it since 1982
Re: Pc3 fitting
Definitely easy to do as advised ^^^^
But...check out the instructions and plan the install putting plenty of time aside - normally a tank off job and whilst the plug in of the injector sockets is straight forward, access isn't always ! (particularly the middle injectors) - that is normally the biggest challenge - apart from that it's pretty much plug and pay - you will most probably have an o2 eliminator to install too, so check out what that entails too as it has to be fitted at the same time - normally straight forward but worth working out your plan of attack - if it all goes wrong, just uninstall ...
But...check out the instructions and plan the install putting plenty of time aside - normally a tank off job and whilst the plug in of the injector sockets is straight forward, access isn't always ! (particularly the middle injectors) - that is normally the biggest challenge - apart from that it's pretty much plug and pay - you will most probably have an o2 eliminator to install too, so check out what that entails too as it has to be fitted at the same time - normally straight forward but worth working out your plan of attack - if it all goes wrong, just uninstall ...