rumpoldstilskin wrote: This is the simpler type to fit below (I've got loads spare too) but the above is more removable as you just pull out the spade connector

every time i see a scotch lock on something it makes me cringe, they cause so many bloody problems it's unbelievable. i spent four hours the other month sorting wiring that they had hacked to bits!!

it's like going to the dentist and seeing a lump hammer and bolster chisel on his equipment tray!!

bloke wrote:

rumpoldstilskin wrote: This is the simpler type to fit below (I've got loads spare too) but the above is more removable as you just pull out the spade connector

every time i see a scotch lock on something it makes me cringe, they cause so many bloody problems it's unbelievable. i spent four hours the other month sorting wiring that they had hacked to bits!!

it's like going to the dentist and seeing a lump hammer and bolster chisel on his equipment tray!!

hahaha the wire only needs to be in this as its measuring the restive track as the throttle opens, no big issues there. I wouldn't use them for anything else.

all fine in theory until the piece of shit ends up cutting it's way through the wire!!

posi taps are great...http://www.posi-products.com/instructions1.html

Don't know if it's been mentioned but it's the bottom set of injectors. Also the bikes ecu is only powered whilst the bike is running. You tube has loads of misleading videos where people use the top rail injector plugs by mistake or forget 02 delete and end up with an FI light. And lastly, anything is a piece of piss when you've done it before! I'm glad I put one on my blade, and I fitted one to my mates GSXR750 last week ( awkward as fook) there are pitfalls but if you prepare well it should go well.

Cheers for the advice, seems I do need 02 sensor eliminators and my alarm is where the instructions say the box should go so I'll need to get a servo buddy aswell to make some space.. It can wait till after I've done oulton park at the end of this month though, don't want to mess about with anything before then..


Sent from my iPhone using Tapatalk

Still not done this yet .. Have all the bits now.. Can't find fitting instructions anywhere


Sent from my iPhone using Tapatalk

bloke wrote:all fine in theory until the piece of shit ends up cutting it's way through the wire!!

posi taps are great...http://www.posi-products.com/instructions1.html

Where do you get these from if you use them, the link Is us Canada only


Sent from my iPhone using Tapatalk

Seems they have a distributor in Ireland.
PROFI PRODUCTS
Flörsheimer Ring 6
DE-67705 Trippstadt

t.: +49 (0)6306-7017-0
f: +49 (0)6306-7017-17
@: info@profi-products.de

Cabernet wrote:Seems they have a distributor in Ireland.
PROFI PRODUCTS
Flörsheimer Ring 6
DE-67705 Trippstadt

t.: +49 (0)6306-7017-0
f: +49 (0)6306-7017-17
@: info@profi-products.de

Seems to be German and charging 12 euro postage and 9 euro for the item..


Sent from my iPhone using Tapatalk

Pacuk wrote:

Cabernet wrote:Seems they have a distributor in Ireland.
PROFI PRODUCTS
Flörsheimer Ring 6
DE-67705 Trippstadt

t.: +49 (0)6306-7017-0
f: +49 (0)6306-7017-17
@: info@profi-products.de

Seems to be German and charging 12 euro postage and 9 euro for the item..


Sent from my iPhone using Tapatalk

Here you go m8t

http://kojaycat.co.uk/epages/950000457. ... cale=en_GB" onclick="window.open(this.href);return false;

http://m.ebay.co.uk/itm/Posi-Tap-Connec ... 0915885740" onclick="window.open(this.href);return false;

http://www.amazon.co.uk/s/?ie=UTF8&keyw ... ogk39idc_b" onclick="window.open(this.href);return false;

Sent from my SM-G900F using Tapatalk