M6 x 28 bolt flange
M6 x 28 bolt flange
Does anybody know were I can get 14 of these today?
Sent from my E6853 using Tapatalk
Sent from my E6853 using Tapatalk
Re: M6 x 28 bolt flange
Phone a few bolt stockists.
J r webster used to be good.
Sent from my iPhone using Tapatalk
J r webster used to be good.
Sent from my iPhone using Tapatalk
Re: M6 x 28 bolt flange
Phoned a few can get normal bolts from m6 x 30 upwards I'm thinking to get these and try and get 4mm washers but thinking they may leak it's for a oil sump as ones I have are like cheese
Sent from my E6853 using Tapatalk
Sent from my E6853 using Tapatalk
Re: M6 x 28 bolt flange
Try Quasar industrial fasteners in Guide Bridge 339 4445.
Or Brian Popes in Stockport 480 8322. I use these for work and both have decent stocks of all sorts of bolts.
If you're going down the bolt and washer route, use a fibre washer not a steel one, wouldn't recommend it as a permanent fix but it'll keep you going until you can get the proper ones.
Or Brian Popes in Stockport 480 8322. I use these for work and both have decent stocks of all sorts of bolts.
If you're going down the bolt and washer route, use a fibre washer not a steel one, wouldn't recommend it as a permanent fix but it'll keep you going until you can get the proper ones.
Re: M6 x 28 bolt flange
Try bradbin and Rudd ltd Wigan mate
Re: M6 x 28 bolt flange
I rode to Bradbin n rudd Bolton this morning as I normal use them but typical shutBradders wrote:Try bradbin and Rudd ltd Wigan mate
Sent from my E6853 using Tapatalk
Re: M6 x 28 bolt flange
Wigan is open till 12 I think pal
Re: M6 x 28 bolt flange
Don't Do m6Bradders wrote:Wigan is open till 12 I think pal
Sent from my E6853 using Tapatalk
- Cabernet
- NWAA Supporter
- Reactions:
- Posts: 2293
- Joined: 29 Mar 2015, 16:16
- Location: Denton, E Manchester
Re: M6 x 28 bolt flange
File?SMUDGER wrote:Phoned a few can get normal bolts from m6 x 30 upwards I'm thinking to get these and try and get 4mm washers but thinking they may leak it's for a oil sump as ones I have are like cheese
Sent from my E6853 using Tapatalk
A Kentish man living in Manchester.
"As soon as he (Tozzi) started with the personal remarks I assumed he was struggling with the rest of his case", Ross Brawn 2009,
"As soon as he (Tozzi) started with the personal remarks I assumed he was struggling with the rest of his case", Ross Brawn 2009,
Re: M6 x 28 bolt flange
I ended up using m6 stainless steel 2 mm washer and blue loctite and instant gasket seems no leak so far been 3 hours
Sent from my E6853 using Tapatalk
Sent from my E6853 using Tapatalk