Dooffle wrote:

MC900 wrote:

Dooffle wrote:Remove and clean the fuel pump and fit a filter to the feed hose. It could be a build up of water in the pump.
When you refit run the pump with the feed attached till fuel comes out, then fit the hose to the injector.

As Pacuk say's the CBF125 had a similar problem. And this is how I sorted my lads out. Not a problem since.

How hard is it to get to the fuel pump and do all that? Also what filter do I need to fit? Cheers for the help.

Depends on how competent you are.
But it is fairly easy to do yourself, smaller bikes can be a bit cramped for room. Check the inner diameter of the fuel hose and get an inline filter with the same dimension inlet and outlet pipe.
Plenty about and easy to get hold of.

MC900 wrote: Is it something like this you are talking about? Cheers. http://m.ebay.co.uk/itm/MOTORBIKE-SCOOT ... nav=SEARCH" onclick="window.open(this.href);return false;

Dooffle wrote:

MC900 wrote: Is it something like this you are talking about? Cheers. http://m.ebay.co.uk/itm/MOTORBIKE-SCOOT ... nav=SEARCH" onclick="window.open(this.href);return false;

Yup that's the one.

Looks like you've sorted it anyway. Wonder how the cable got mullered.

Dooffle wrote:

MC900 wrote: Is it something like this you are talking about? Cheers. http://m.ebay.co.uk/itm/MOTORBIKE-SCOOT ... nav=SEARCH" onclick="window.open(this.href);return false;

Yup that's the one.

Looks like you've sorted it anyway. Wonder how the cable got mullered.